Market Trade @ Home Blogs

High end cable at not such a high end price.
Bought this cable to connect my Xbox 360 to my HDMI computer screen, and it has really brought my gaming and movies to life! The improvements this mediabridge cable has made to my visual experience with my 360 over Microsoft's 360 HDMI cable are mind-numbingly obvious. Microsoft should be ashamed of themselves for giving out such garbage cables. With the mediabridge cable, my 360 puts out a sharper, more colorfully accurate picture. If you are in the market for a low price, high quality HDMI cable, look no farther!!!

Exactly What Was Needed, Even The Price!
I needed additional HDMI cables, but couldn't see myself spending - for "Monster" cables at BestBuy, so I did my research and came across these. Getting the same product, for less than per cable, I was able to buy 6 for the price of one "Name Brand"


And they are not cheaply made, they are well put together and I will use them for many years to come!

Works
you don not need an expensive cord to get digital signal. this works just as well and preforms great

Plug and Play!
The quality was good and the cable was well built! I have no issues with this cable. It is a great value.

Not as pictured
The package, photos, and exact product shown on Amazon.com are not the same as the product shipped. The photos and advertising clearly show heat diffusers on the modules. They arrived as plain unprotected modules, same product number. Otherwise, they seem to be working fine. I actually called Amazon prior to ordering, because I saw the unprotected modules in a retail store (.99 plus tax), same product number, and was confused. Also, same comment as mine from other Amazon reviews. I was assured by Amazon that if there was a discrepancy in the past, it would have been corrected by now. It turns out that is not the case.

Less expensive and does the trick
PNY seems to be less expensive than most other brands and seems to run as reliably as anything else on the market!

Just what I needed !!!
I needed to control a slave flash but did not want the limitations of the line of site which is built in to my slave flash. This thing is amazing. using it with my nikon d3000 with no problems. I set the flash on the kitchen counter and went two rooms away and held the camera around the corner and wha-la --- flash. I plan on ordering a second receiver for my other flash. I have tested this only to about 40ft with no problems. if you are hesitating, dont. this is a great item.

Very Bad Service which turned out to be Good
I orderd this from India and shipped it to a friend of mine who was coming back to india. I thought that they shipped the Receiver and Transmitter, but when my friend got it to me i only got the receiver. After a few days I emailed the guys at Cowboy Studio and they were decent enough to send me the Trigger.
My Review has changed from Bad to Good..
Keep up the Good Work CowBoy Guyss..

Great with the right flash, but not nikon sb 400 / 600 or 900
This type of flash works just fine however if you are using a locking style nikon flash, this wireless is not the one. Why not? No locking pin hole. Without this, your flash can fall off of this set up.

However, if you have the old compression style flash, you will be just fine.

Cowboy Studio Wireless Remote
These work. Plain and simple they just work. I use them on my Canon 430EX II and have not had a problem. True you cannot utilize ETTL, you have to have the flash set to manual mode but for a cheap way to use wireless flash they work great. They feel kinda cheap and light but that's what they are. None the less they work. Good for the beginner on a budget like me.

Just what I needed !!!
I needed to control a slave flash but did not want the limitations of the line of site which is built in to my slave flash. This thing is amazing. using it with my nikon d3000 with no problems. I set the flash on the kitchen counter and went two rooms away and held the camera around the corner and wha-la --- flash. I plan on ordering a second receiver for my other flash. I have tested this only to about 40ft with no problems. if you are hesitating, dont. this is a great item.

Very Bad Service which turned out to be Good
I orderd this from India and shipped it to a friend of mine who was coming back to india. I thought that they shipped the Receiver and Transmitter, but when my friend got it to me i only got the receiver. After a few days I emailed the guys at Cowboy Studio and they were decent enough to send me the Trigger.
My Review has changed from Bad to Good..
Keep up the Good Work CowBoy Guyss..

Great with the right flash, but not nikon sb 400 / 600 or 900
This type of flash works just fine however if you are using a locking style nikon flash, this wireless is not the one. Why not? No locking pin hole. Without this, your flash can fall off of this set up.

However, if you have the old compression style flash, you will be just fine.

Cowboy Studio Wireless Remote
These work. Plain and simple they just work. I use them on my Canon 430EX II and have not had a problem. True you cannot utilize ETTL, you have to have the flash set to manual mode but for a cheap way to use wireless flash they work great. They feel kinda cheap and light but that's what they are. None the less they work. Good for the beginner on a budget like me.

Just what I needed !!!
I needed to control a slave flash but did not want the limitations of the line of site which is built in to my slave flash. This thing is amazing. using it with my nikon d3000 with no problems. I set the flash on the kitchen counter and went two rooms away and held the camera around the corner and wha-la --- flash. I plan on ordering a second receiver for my other flash. I have tested this only to about 40ft with no problems. if you are hesitating, dont. this is a great item.

Very Bad Service which turned out to be Good
I orderd this from India and shipped it to a friend of mine who was coming back to india. I thought that they shipped the Receiver and Transmitter, but when my friend got it to me i only got the receiver. After a few days I emailed the guys at Cowboy Studio and they were decent enough to send me the Trigger.
My Review has changed from Bad to Good..
Keep up the Good Work CowBoy Guyss..

Great with the right flash, but not nikon sb 400 / 600 or 900
This type of flash works just fine however if you are using a locking style nikon flash, this wireless is not the one. Why not? No locking pin hole. Without this, your flash can fall off of this set up.

However, if you have the old compression style flash, you will be just fine.

Cowboy Studio Wireless Remote
These work. Plain and simple they just work. I use them on my Canon 430EX II and have not had a problem. True you cannot utilize ETTL, you have to have the flash set to manual mode but for a cheap way to use wireless flash they work great. They feel kinda cheap and light but that's what they are. None the less they work. Good for the beginner on a budget like me.

CT-150, Great Soundbar "if" you know how to set it up "correctly"
IMPORTANT information about soundbars and the CT-150:

For any negitive reviews, ignor them.
People that give the CT-150 and other soundbars negitive reviews simply dont know how to set them up or are using them in the wrong room shape.

If you have walls to the sides of you to reflect the sound coming from the CT-150 (or many other soundbars) you will get a room filling sound that in most case's can really come close to a surround sound.

As with any soundbar, they need to be mounted higher instead of lower, with a soundbar mounted lower the sound will get eaten up by carpet, and furniture and everything else that is at that level,,, a soundbar needs to be mounted at least at ear level or above to really work properly.

I have owned a ton of soundbars over the years (Yamaha YSP's, Vizio, JVC and Zvox just to name a few) my CT-150 sounds amazing (even better than my older CT-100 and CT-500).

"Some" settings for my CT-150,,,my BluRay player is set to bitstream for the Dolby Digital and DTS, center channel on my CT-150 kept at around +1 (if you set the center channel to high it over powers the surround effect),,, just doing those two things will greatly help in the overall sound.

Im getting a big room filling sound from my CT-150 because I have set it up corrctly and because I have walls on each side of the soundbar to reflect the sound around the room.

There are more settings that can be made to better the sound but I just wanted to list the two most important (center level kept lower and bitstream from your BD player).

Some people say "its not true surround" or "its not as good as a 5.1 system",, sorry but I take issue with those comments as I prefure the sound of a good soundbar over a 5.1 full surround system,,, with a soundbar you have sound all around you and your in a big sound bubble,, with a 5.1 system there is discrete sound coming from each speaker, to me that sounds less natural that a soundbar,,,, I would rather have a good soundbar than a 5.1 system any day of the week.

Anyhow,,,, the CT-150 is really a great sounding system,,, if you buy one, and it does not sound good,,, its your fault.

Cheers
Davyo

Great Choice
I have owned the sound bar for about a month now and love it. I watch movies on 25 and some time have to turn it down because it is too loud. It goes to 50 max. You hear dialogue crystal clear and a few times watching movies the surround bar has fooled me on surround effects. The sub woofer has the perfect amount of low end bass watching movies. I am very pleased with my purchase and would recommend it to anyone looking to upgrade their TV speakers.

like night and day
We have a very large room with vaulted ceilings. The audio from the TV speakers was awful. Installed the 150 on our Sony Bravia and hid the subwoofer in a cabinet and it sounds great. I do wish the audio adjustments were viewable on the TV screen as I have to open the cabinet to see the readout to make adjustments. It made an amazing difference without having to install and place a bunch of speakers.

Very Satisfied
I did a ton of research on soundbars, and I am very pleased with this one. I didn't want a bunch of wired speakers, and my home theatre room is on the small side so my needs were minimal. This thing sounds and functions really well, I especially recommend it if your system connects to Pandora.

AWESOME
i had 2gb ddr 1333 kingston value ram, and now with this my pc is flying!
i recomend this product
good shipment too ;)

great value
i'm a noob over clocker and i got this up to 1700+Mhz and still running strong :p

3.49GB
It wasn't 4GB. Well, It is 4GB only if I rounded the decimal number.

It was 3.49GB. But as you know, this ram is cheap.So Im giving 3stars

THE CORSAIR DDR3 1333 4GB (2X2GB) IS AMAZING!!!
I GOT THIS CORSAIR MEMORY KIT FOR ONLY 95 BUCKS AND IT WORKS EXCELLENT IN WINDOWS 7 WITH MY INTEL CORE I3 PROCESSOR & ASUS P7H55-M PRO MOTHERBOARD. I RECOMMEND IT. ITS THE BEST OPTION FOR THE NEW 2010 INTEL CORE I3.

Best Value
Haven't tested it's 1.4 abilities yet, but they I have zero complaints about their design, fit, and performance. They feel thick and well shielded without being too stiff, perfect fit, the rubber handles are comfortable for pulling and plugging and aren't so big they get in the way, no performance issues.

Quality cables at a quality price
The cables are well made and they do what they are supposed to, at a very low cost.

amazing
i like it its work very well in my lg invinia 3d

thanks alot for this great hdmi

great buy
Great quality and results for my UN55C800 Samsung 3D tv and 3D blueray player. I get lots of Oh's and Ahhs from friends that see the quality of pic. this HDMI is a true 1.4 version, and delivers the comlete signal.

Overclocking requires better cooling
I bought this set to go with my i7 940 on an Asus Rampage III Extreme motherboard. Initially, after overclocking my CPU to 3.62Ghz and RAM up a few notches it was able to stress test on Prime95 64bit to push my CPU to 75C and RAM at 35C.

After doing major multitasking, I found myself with a frozen computer. RAM was recorded to have reached 60C.

I would recommend the Corsair RAM cooler but reviews aren't that great. Unless you plan to have over 10 browser tabs open, VLC Player with Battlefield Bad Company 2 at high default settings at 1920x1080 running in the background with Adobe Flash and Photoshop running all at the same time, the RAM usually stays at 20C to 40C.